Home
Products

Valve Position Transmitters

Watchman

Sentinel

Sentinel-II

Survivor

Survivor-II

Scout

Guardian

Companion

Indicateur

Dribble Control

Spare Parts

Valve Positioners

Series 40

Series 50

Valve Networking

ASi

Device Net

Profibus DP

Bracket Kits for Your Actuator

Helpful Information

VPT Selection Guidelines

PDF Literature

The Company 

About Moniteur

Contact Us 

Sitemap

 
Bracket Kits for AUTOMAX Actuators
Moniteur produces the finest quality NAMUR bracket kits for Automax SuperNova B Series, SNA Series and SXL Stainless Steel Series pneumatic actuators, available in both plated and stainless steel. Standard shaft bracket kits for older Automax S Series are also available and are compatible with any limit switch with the 2.25" square bolt pattern and shaft with 1/4" flats. Choose Moniteur with confidence.
Bracket Kits for NAMUR Shaft
Part Number Plated Steel Stainless Steel
B050 / SXL050 BKT-NP120 BKT-NS120
B063 / SXL063 BKT-NP120 BKT-NS120
B085 / SXL085 BKT-NP120 BKT-NS120
B100 / SXL100 BKT-NP120 BKT-NS120
B115 / SXL115 BKT-NP130 BKT-NS130
B125 / SXL125 BKT-NP130 BKT-NS130
B150 / SXL150 BKT-NP130 BKT-NS130
B175 BKT-NP130 BKT-NS130
B200 BKT-NP130 BKT-NS130
SNA250 BKT-NP130 BKT-NS130
SNA300 BKT-NP130 BKT-NS130

*change part number to"E" from "N" for long NAMUR bracket kits

Be sure to check out our Thermoplastic bracket kits available for this actuator series.

Bracket Kits for AUTOMAX

Older Series - Standard Shaft

Part Number Plated Steel Stainless Steel
S050 BKT-RP131 BKT-RS131
S063 BKT-RP131 BKT-RS131
S085 BKT-RP132 BKT-RS132
S100 BKT-RP133 BKT-RS133
S115 BKT-RP134 BKT-RS134
S125 BKT-RP134 BKT-RS134
S150 BKT-RP135 BKT-RS135
S175 BKT-RP135 BKT-RS135
S200 BKT-RP136 BKT-RS136
N250N BKT-RP138 BKT-RS138
N300N BKT-RP139 BKT-RS139
A32 BKT-RP137 BKT-RS137

Plated Steel bracket kits include plated steel screws and washers plus precision machined aluminum couplers (standard shaft only) specifically developed for the actuator.

Stainless Steel bracket kits include stainless steel screws and washers plus precision machined stainless steel couplers (standard shaft only) specifically developed for the actuator.

Back to Brackets

Moniteur Devices, Inc. 36 Commerce Road, Cedar Grove, NJ 07009 T 973.857.1600 F 973.857.7289