AMYB-5S20-DN7
DeviceNet Valve Position Monitoring
.jpg)
FMYB-5S20-DN7
PMYB-5S20-DN7
SMYB-5S20-WD2
DeviceNet Valve Position Monitoring
Moniteur VPCs with encapsulated DeviceNet interface cards adapt your on/off automated valves to an advanced DeviceNet valve network. Money and time will be saved as installation and maintenance are streamlined with reduced wiring and improved system diagnostics.
Based on the CAN protocol, the DeviceNet protocol was developed by Allen Bradley to provide industry with a simple and cost effective method of networking field devices. Moniteur supplies a full range of accessories including cable and quick- disconnect connectors to simplify installation.
Moniteur’s Advanced DeviceNet Platform Improves Reliability
The Network Card
A full function encapsulated network card includes the following benefits:
- Encapsulated electronics and position sensors ensure reliability in corrosive, humid and dirty environments.Hall effect position sensors designed for the card and provide optimum stability in areas of high vibration.
- Two transistor outputs each with an output of 4.8w @ 24VDC are available for your solenoid valves and allow many standard DC NAMUR valves to be used, avoiding special “low power” valves
- High visibility LEDs are located on-board for local indication of on -board sensors, auxiliary inputs, outputs and network state.
- Two additional inputs are optional for local pressure or temperature switches.
The Network Card
A full function encapsulated network card includes the following benefits:
- Encapsulated electronics and position sensors ensure reliability in corrosive, humid and dirty environments.Hall effect position sensors designed for the card and provide optimum stability in areas of high vibration.
- Two transistor outputs each with an output of 4.8w @ 24VDC are available for your solenoid valves and allow many standard DC NAMUR valves to be used, avoiding special “low power” valves
- High visibility LEDs are located on-board for local indication of on -board sensors, auxiliary inputs, outputs and network state.
- Two additional inputs are optional for local pressure or temperature switches.
DeviceNet Network Features
- Each network supports up to 64 nodes or addresses
- 125K, 250K, and 500K bit/sec.
- 1640ft. maximum trunk length
- Thick and Thin cable types
- Trunkline / Dropline topology
- Supports online node insertion and removal
Intelligent Part Number System
| A | M | Y | B | - | 5 | S | 2 | 0 | - | DN7 |
| 1 | 2 | 3 | 4 | - | 5 | 6 | 7 | 8 |
| 1 - Enclosure Type | 4 - Bearing | ||
| Ex-proof Nema 7,9 Aluminum | A | Bronze | B |
| General Purpose Aluminum Nema 4 | F | 303 Stainless | S |
| Zytel Thermolastic Nema 4 | R | 5 - Shaft | |
| 2 - Cover | Standard 303 SS | 1 | |
| With Moniteur | M | Standard 316 SS | 3 |
| Flat Cover | F | NAMUR 303 SS | 5 |
| 3 - Moniteur | NAMUR 316 SS | 7 | |
| No Indicator | N | LONG NAMUR 303 SS | E |
| Black / Yellow | Y | LONG NAMUR 316 SS | G |
| 3-way path O | O | 6 - Switch Type | |
| 3-way path T | T | On Board Hall Effect Sensors | S |
| 3-way path F | F | 7 - Sensor Quantity | 2 |
| 4-way path S | S | 2 | 2 |
| 180 degree T | 1 | 8 - Conduit | |
| Green / White | G | (2) F 3/4" NPT (A) | 0 |
| Red / White | R | (2) F 3/4" + (1) F 1/2" NPT (A) | 6 |
| Blue / White | B | (2) F 1/2" NPT (F, R) | 0 |
| Green / Red | A | (3) F 1/2" NPT (F, R) | 6 |
| Red / Green | C | Network Card | |
| ASi 2.1, 2 Transistor Outputs | 0 |
Additional Advantages of In-Plant Networking
Drastically Reduced Installation Costs – Wiring and installation time are reduced, yielding a cost saving up to 40% versus conventional methods.
Reduced Maintenance Costs and Increased System Reliability – Components require less maintenance and are designed to work “one way” only.
Built-in diagnostic functions allow components to be continuously monitored.
Faster Start-Up – Set-up is simpler and diagnostic functions speed troubleshooting.
Simplified Plant Wiring – Automated valves can be inter-connected in any configuration. Utilizing only 2 or 4 wires eliminates wiring “spaghetti” of older schemes.
- Benefits
Moniteur’s Advanced DeviceNet Platform Improves Reliability
The Network Card
A full function encapsulated network card includes the following benefits:
- Encapsulated electronics and position sensors ensure reliability in corrosive, humid and dirty environments.Hall effect position sensors designed for the card and provide optimum stability in areas of high vibration.
- Two transistor outputs each with an output of 4.8w @ 24VDC are available for your solenoid valves and allow many standard DC NAMUR valves to be used, avoiding special “low power” valves
- High visibility LEDs are located on-board for local indication of on -board sensors, auxiliary inputs, outputs and network state.
- Two additional inputs are optional for local pressure or temperature switches.
The Network Card
A full function encapsulated network card includes the following benefits:
- Encapsulated electronics and position sensors ensure reliability in corrosive, humid and dirty environments.Hall effect position sensors designed for the card and provide optimum stability in areas of high vibration.
- Two transistor outputs each with an output of 4.8w @ 24VDC are available for your solenoid valves and allow many standard DC NAMUR valves to be used, avoiding special “low power” valves
- High visibility LEDs are located on-board for local indication of on -board sensors, auxiliary inputs, outputs and network state.
- Two additional inputs are optional for local pressure or temperature switches.
- Features
DeviceNet Network Features
- Each network supports up to 64 nodes or addresses
- 125K, 250K, and 500K bit/sec.
- 1640ft. maximum trunk length
- Thick and Thin cable types
- Trunkline / Dropline topology
- Supports online node insertion and removal
- Part Numbers
Intelligent Part Number System
A M Y B - 5 S 2 0 - DN7 1 2 3 4 - 5 6 7 8 1 - Enclosure Type 4 - Bearing Ex-proof Nema 7,9 Aluminum A Bronze B General Purpose Aluminum Nema 4 F 303 Stainless S Zytel Thermolastic Nema 4 R 5 - Shaft 2 - Cover Standard 303 SS 1 With Moniteur M Standard 316 SS 3 Flat Cover F NAMUR 303 SS 5 3 - Moniteur NAMUR 316 SS 7 No Indicator N LONG NAMUR 303 SS E Black / Yellow Y LONG NAMUR 316 SS G 3-way path O O 6 - Switch Type 3-way path T T On Board Hall Effect Sensors S 3-way path F F 7 - Sensor Quantity 2 4-way path S S 2 2 180 degree T 1 8 - Conduit Green / White G (2) F 3/4" NPT (A) 0 Red / White R (2) F 3/4" + (1) F 1/2" NPT (A) 6 Blue / White B (2) F 1/2" NPT (F, R) 0 Green / Red A (3) F 1/2" NPT (F, R) 6 Red / Green C Network Card ASi 2.1, 2 Transistor Outputs 0 - Additional Advantages
Additional Advantages of In-Plant Networking
Drastically Reduced Installation Costs – Wiring and installation time are reduced, yielding a cost saving up to 40% versus conventional methods.
Reduced Maintenance Costs and Increased System Reliability – Components require less maintenance and are designed to work “one way” only.
Built-in diagnostic functions allow components to be continuously monitored.
Faster Start-Up – Set-up is simpler and diagnostic functions speed troubleshooting.
Simplified Plant Wiring – Automated valves can be inter-connected in any configuration. Utilizing only 2 or 4 wires eliminates wiring “spaghetti” of older schemes.
- Visual Indicator
- Documents