A unique ABS polymer resin bracket kit has been developed to mount Moniteur VPTs to actuators with the NAMUR standard accessory mounting configuration. The kit offers many advantages over conventional plated steel bracket kits:
These kits are available for the NAMUR 80x30x20 mm mounting pattern, and will work with the actuators listed below:
For use with the Watchman VPT and Survivor Series Units only:
Note: The limiting factor governing bracket-actuator fit is the inside diameter of the bracket which is 1.75″. Larger size actuators with the 80 x 30 x 20 mounting might have a shaft “collar” that has a larger diameter.
| Airtech | Fisher | Radius |
| PA 050 | 1032-45 | AD/S005 |
| PA 063 | 1032-70 | AD/S008 |
| PA 075 | 1032-130 | AD/S012 |
| PA 085 | 1032-185 | AD/S020 |
| PA 100 | AD/S030 | |
| Airtorque | Hytork | Remote Control |
| AT 0 | XL-45 | RC210 |
| AT 1 | XL-70 | RC220 |
| AT 2 | XL-130 | RC230 |
| At 2.5 | XL-185 | RC240 |
| Amri Actair | Jamesbury | Triac |
| 3 | VP-VL05 | TR-20 |
| 6 | VP-VL10 | TR-40 |
| 12 | VP-VL20 | TR-80 |
| 25 | VL-VL25 | TR-130 |
| 50 | VP-02 | TR-200 |
| 100 | VP-04 | |
| 200 | ||
| Automax | K-Tork | TruTorq |
| SNA 050 | K-1 | TDA/SR 2 |
| SNA 063 | K-2 | TDA/SR 4 |
| SNA 085 | TDA/SR 8 | |
| SNA 100 | ||
| Bettis | MCF | Unitorq |
| RPC Series (All) | M 20 | M 20 |
| G Series (All) | M 40 | M 30 |
| M 80 | M 52 | |
| M 73 | ||
| M 103 | ||
| M 148 | ||
| Compac Torque | Nibco | |
| CTS-30 | Size 2 | |
| CTS-40 | Size 4 | |
| CTS-50 | Size 8 | |
| CTS-60 | ||
| Elomatic | QTRCO | Worcester |
| E 25 | R04 | 1039N |
| E 40 | R05 | 1539N |
| E 100 | R07 | 2039N |
| E 200 | R10 |
© 2021 · Moniteur Devices Inc. - all rights reserved :: Wordpress design by Isaac Laughs